AUTOMATIC WATER SOFTENERS LOGIX VALVE

These high performance automatic water softeners have been produced for over 20 years and can automatically start the resin regeneration process.

Provided with a special electronic timer that, once programmed, autonomously starts the resin regeneration process, they allow the passage of the water also during resin regeneration, so that the connected devices can keep on working.

They contain a specially conceived mixer that allows obtaining, whenever needed, a certain degree of water hardness. Some models, among other things, can be equipped with a dedicated tool for resin sterilization.

Users only have to periodically fill the brine tank with salt.

The product consists of three parts:

A cylinder containing the resin;

A brine tank;

A valve managing the flux of water and the resin regeneration process.

The valve is the key element in these water softeners and it comes in four different models: ALIA, 366, LOGIX and PERFORMA.

The thermoplastic material they consist of guarantees utmost resin efficiency and a proper functioning of the water softener.

All four models are conceived to meet the users’ needs, both in terms of intended use and of water consumption; the valves require minimum maintenance and their high reliability makes them particularly suited for the catering industry, while the resin sterilization tool makes them suitable for domestic use too.

LOGIX Valve

Designed for the water softeners of the series GIX and Mini-Maxi, as well as for some Automatici Grandi softeners, this valve is remarkably reliable in terms of mechanics and is assisted by a completely electronic timer with several functions. The LOGIX valve can be installed both in small water softeners with 5 Litres cylinders, as well as larger, 100 Litres water softeners. Maximum flow rate amounts to 1500 Litres/Hour. It comes in two different versions:

Chronometric Version (TIMER 740):

User-friendly and highly reliable, this is the most successful version. It boasts customized programs aimed at reducing both time and water consumption during resin regeneration. The timer can be programmed so as to perform regeneration on a precise day of the week or after a given span of time since the previous regeneration, with a frequency going from one regeneration every 93 days and one every day. Once the program data are set, it is possible to block access to them, thus preventing non-authorized staff/individuals from modifying them.

Volumetric Version (TIMER 760):

This model does not require to schedule the days when regeneration should occur, since it registers the volume of water flowing through the resin, and, when the latter is about to be worn out, automatically starts the regeneration process. For this reason this version is particularly well suited for large cylinders and discontinuous water consumption. Also this version allows blocking access to the setting data, thus preventing non-authorized staff/individuals from modifying them.