These high performance automatic water softeners have been produced for over 20 years and can automatically start the resin regeneration process.

Provided with a special electronic timer that, once programmed, autonomously starts the resin regeneration process, they allow the passage of the water also during resin regeneration, so that the connected devices can keep on working.

They contain a specially conceived mixer that allows obtaining, whenever needed, a certain degree of water hardness. Some models, among other things, can be equipped with a dedicated tool for resin sterilization.

Users only have to periodically fill the brine tank with salt.

The product consists of three parts:

A cylinder containing the resin;

A brine tank;

A valve managing the flux of water and the resin regeneration process.

The valve is the key element in these water softeners and it comes in four different models: ALIA, 366, LOGIX and PERFORMA.

The thermoplastic material they consist of guarantees utmost resin efficiency and a proper functioning of the water softener.

All four models are conceived to meet the users’ needs, both in terms of intended use and of water consumption; the valves require minimum maintenance and their high reliability makes them particularly suited for the catering industry, while the resin sterilization tool makes them suitable for domestic use too.

366 Valve

Designed for the ISI series, it is compact and easy to program, users only have to set three data: the quantity of salt needed, the time when they want the regeneration to start and the chosen lapse of time between each regeneration process. It differs from 255 Logix valve in that:
 

• It is smaller;
• It boasts a user-friendly programming, really unequalled and unique in its kind;
• It allows users to schedule the day of the week they want regeneration to occur;
• The resin regeneration process always occurs at 2am;
• It is not equipped with the optional for resin sterilization, therefore it is not suitable for domestic use;
• It is not equipped with a “salt alarm”, warning users when it is time to refill the brine tank;
• It is not available in the volumetric version;
• It is not possible to block access to prevent unauthorized individuals from changing the settings;
• Lengthier regeneration time, and consequently higher water consumption.

With a maximum flow rate of 1500 Litres/Hour, this valve can be installed exclusively on small-sized water softeners, namely models ISI5, ISI8 and ISI12.